Guided Purchasing

Can BannerFlex hardware be bolted to utility poles in lieu of banding?

Yes, each of the models can be through-bolted or lag bolted to most any type of utility pole. The BannerFlex D3 and BannerFlex Metro models already have bolt holes cast into them. The JR model does not have bolt holes but appropriate size holes can easily be drilled by Consort or by the customer - there are two little dimples or circles cast into the JR to indicate where the holes should be drilled.

Bannerflex Hardware Guidebook

The BannerFlex Guide

The BannerFlex Guidebook was created for anyone looking to use banner brackets to hang vertical street banners. Filled with the information that you need to make an informed decision, the book aims to educate readers about the benefits of the BannerFlex system. From the use of fiberglass arms and stainless steel bands to the use of "canted" banner arms, BannerFlex is engineered to maintain a taut, visually appealing installation that mounts to every light pole's exact cross section. To learn more about the best possible choice for exterior light pole banner hardware, download the BannerFlex Guidebook.

DOWNLOAD GUIDEBOOK